Studi Eksperimental Pengaruh Bukaan Katup Inlet dan Outlet Ring Blower RB-200S

  • Ahmad Imam Rifa'i Politeknik Jambi
  • . Novarini

Abstract

The blower is a device used to increase the air pressure and increase the flow rate of air and gas. In this study, the effect of the inlet and outlet valve openings of the ring blower was experimentally investigated. Variations in the inlet and outlet valve openings are 50%, 75%, and 100%, respectively. The results showed that the larger the opening of the inlet and outlet valves, the greater the flow capacity (Q). Furthermore, the larger the inlet and outlet valve openings, the lower the ring blower air flow pressure (P).

References

[1] Sanda, “Disain Blower Dan Cerobong Untuk Membuang Limbah Bau Dan Ozon Iradiator Gamma 500 kCi,” J. Teknol. Pengelolaan Limbah, vol. 15, no. 1, pp. 39–50, 2017.
[2] S. Priyanto, “Rancang Bangun Drum Oven Mesin Pengering Limbah Ikan Untuk Pakan Ternak” J. Kajian Teknik Mesin., vol. 2, no. 2, pp. 128-132. 2017.
[3] F. Sugara and Y. T. Mulya, “Pengaruh Kecepatan Putaran Blower Evaporator Terhadap,” J. Teknol. Terap., vol. 4, no. 2, 2018.
[4] A. Imam, “Pengaruh Tekanan Refrigeran R-134a Terhadap Nilai Coefficient of Performance (COP),” J. Inov., vol. 3, no. 2, pp. 9–12, 2020.
[5] Adriansyah, “Rancang Bangun Instalasi Pengujian Blower Sentrifugal,” Tek. Mesin, vol. 3, no. 2, pp. 71–78, 20016.
[6] P. Agustiar, W. Pracoyo, and F. Azharul, “Analisa Pengaruh Diameter Impeller Terhadap Kapasitas dan Penurunan Tekanan Blower Centrifugal” J. Rekayasa Mater. Manufaktur dan Energi, vol. 2, no. 2, pp. 131–139, 2019.
[7] P. Raharjo, “Karakteristik kebisingan pada blower cincin karena perubahan kecepatan putar,” Proceeding Seminar Nasional Riset Terapan, 2019.
[8] C. M. Jang and G. Y. Han, “Enhancement of performance by blade optimization in two-stage ring blower,” J. Therm. Sci., vol. 19, no. 5, pp. 383–389, 2017.
Published
2021-07-31
How to Cite
RIFA'I, Ahmad Imam; NOVARINI, .. Studi Eksperimental Pengaruh Bukaan Katup Inlet dan Outlet Ring Blower RB-200S. Jurnal Inovator, [S.l.], v. 3, n. `1, p. 1-4, july 2021. ISSN 2615-5052. Available at: <http://ojs.politeknikjambi.ac.id/inovator/article/view/161>. Date accessed: 28 nov. 2021. doi: https://doi.org/10.37338/ji.v3i`1.161.