Penerapan Alat Test dan Kalibrasi Flowmeter Solar pada Pabrik Pemanggangan Anoda PT INALUM
DOI:
https://doi.org/10.37338/elti.v2i2.183Keywords:
Calibration, Calibrator Standard , Flowmeter, Measuring Vessel.Abstract
Measuring instrumentation equipment plays an important role. The results of measurements made by several similar measuring instruments do not necessarily show the same results, even though these tools have the same type. The accuracy of all measuring instruments will decrease over time. However, the decrease in accuracy is also caused by the presence of electricity or a hazardous environment. These changes depend on the type of instrument and the environment in which it is used. In order for the instrument to have accuracy in measuring, it is calibrated. Calibrate the solar flowmeter using a recalibrated standard measuring vessel calibrator. Calibration is done by taking flow rate data on the flowmeter which is compared with the measurement results on the standard calibrator. The results of characterization based on the calibration show that the average error reading is 0.01% so that the tool is ready for use.
References
Asy’ari, M. K. (2014). Kalibrasi. kalibrasi flowmeter dalam aliran fluida pada sistem manifold.
Budi yanto, dkk. (2013). Pompa. Perancangan sistem kontrol dan pengaman motor pompa air terhadap gangguan tegangan dan arus berbasis arduino, 4 N0. 2, 80.
Forklift, S. B. (2017). Defenisi Bejana Ukur. Cara menggunakan bejana ukur 5/10/20 Liter. Diambil dari http://aldinosyah.blogspot.co.id
Irvan Siregar, M. (2011). Kalibrasi. Teknik kalibrasi thermocouple type-k di PT Inalum Kuala Tanjung.
KIM LIPI. (2016). ISO/IEC Guide 17025:2005. Quality, Indonesia Productivity And Institute. Diambil dari https://ipqi.org/definisi-kalibrasi/
Kokai, K. (2018). Defenisi Katup Valve. Solusi lengkap katup industri. Diambil dari www.valve.id
Manalu, E. (2020). Minyak Solar. Perancangan sistem pentakaran minyak tanah dan solar menggunakan sensor flowmeter berbasis arduino uno dengan tampilan android, 7. Diambil dari http://repositori.usu.ac.id/handle/123456789/27193
Maulana, R. (2016a). Flowmeter. Karakterisasi Flowmeter untuk laju aliran rendah pada sirkulasi alami di untai FASSIP-01. Diambil dari jurnal.umj.ac.id/index.php/semnastek
Maulana, R. dkk. (2016b). Kalibrasi flowmeter. Karakterisasi Flowmeter untuk laju aliran rendah pada sirkulasi alami di untai FASSIP-01, 2. Diambil dari http://jurnal.umj.ac.id/index.php/semnastek
Mitra Abadi, W. (2019). Defenisi Flowmeter. Defenisi Flowmeter, Harga Flowmeter, Jenis, Kegunaan flowmeter Air, Tipe.
Muslim, aziz dkk. (2020). Bejana Ukur Standar. Prototipe kontrol level bejana ukur standar berbasis arduino, sensor ultrasonik, dan AC control speed motor termodifikasi, 12 (1), 29.
Pradika, H. dkk. (2013). Relay. Thermal Overload relay sebagai pengaman overload pada miniatur gardu induk berbasis progamamble logic controller (plc) CP1E-E40DR-A, 81.
PT INALUM. (2015a). ISO 14001. Manajemen Mutu, Lingkungan dan Kesehatan & Keselamatan Kerja. Diambil dari https://www.lr.org/id-id/iso-14001/
PT INALUM. (2015b). ISO 9001. Manajemen Mutu.
Reval. (2015). Defenisi Solar.
Tedjamaja, N. (2017). Defenisi Pompa.
Turang, D. A. O. (2015). Relay. Pengembangan Sistem relay pengendalian dan penghematan pemakaian lampu berbasis mobile, 75.
Yana, lLingga dkk. (2017). pompa. rancang bangun mesin pompa air dengan sistem recharging, 8 N0. 2.
