DESAIN MESIN SPINNER BERBASIS IoT
DOI:
https://doi.org/10.37338/elti.v1i2.173Keywords:
Testing, Oil Draining Machine, IoT.Abstract
At present a lot off snack is produced by small industries that use oil-based ingredients for frying, fried snacks have a limitation of less consumption age because there is oil content in it Therefore an oil draining machine is made which functions to drain the oil but can be operated using a smartphone device. This drain machine is equipped with the MCU ESP32 node which is connected to firebase via the internet. The software used to design this is Android Studio.The results of this system are as planned. This is evidenced by the data displayed on Firebase same as Android applications. There are 2 modes, namely automatic and manual modes that can be selected by the user to operate this spinner.
References
Anang Lastriyanto, (1997). Penggorengan Buah secara Vakum (vacuum Frying) dengan Menerapkan Penvakum “Water Jet”. Temu Ilmiah Alat Pertanian, Bogor, 27 Februari 1997.
Cahyono, TB & Adi S (2003). Manajemen Industri Kecil. Yogyakarta: Liberty Press.
Dwi Sapto, Agung (2010), Frying Vacuum Machine Design And Vacuum Tube Thermal Analysis Using Catia P3 V5r14, Teknologi Industri: Universitas Gunadarma Jakarta.
Espito & Thrower, RJ (1991). Machine Design, NewYork: delmar Publisher, Inc.
Hapsari, Hepi dkk (2008), Peningkatan Nilai Tambah dan Strategi Pengembangan Usahan Pengolahan Salak Manonjaya, Jurnal Agrikultura vol 19 nomor 3 tahun 2008, ISSN 0853-2885, Fakultas Pertanian, Universitas Padjajaran.
Budiharto, Widodo. 2007.” Panduan Praktikum Mikrokontroler AVR AT MEGA 16”. Jakarta: PT Elex Media Komputindo.
Datasheet of ATMega 128. Atmel Corporation. www.atmel.com
Djanah, Djamalina.1998.” Beternak Ayam”. CV. Yasaguna. Surabaya.
Hannawati,Anies dkk. ” Prototipe Sistem Pengendali Temperatur Berbasis Fuzzy Logic Pada Sebuah Inkubator”. Control System laboratory. Petra Christian University.
Hartanto, Thomas Wahyu Dwi, “ Analisis dan Desain Sistem Kontrol dengan Matlab”. Yogyakarta: Penerbit Andi.
Heryanto, M.Ary dan Wisnu Adi. “ Pemrograman Bahasa C untuk mikrokontroler AT MEGA 8535 “.Yogyakarta : Penerbit Andi.
Jasa, Lie.2006.” Pemanfaatan Mikrokontroler AT Mega 163 Pada Prototipe Mesin Penetasan Telur Ayam. Universitas Udayana. Bali.
