Rancang Bangun Mesin Perajang Singkong Multi Pisau
DOI:
https://doi.org/10.37338/inovator.v1i2.104Keywords:
Singkong, Perajang, Multi PisauAbstract
Cassava is a type of tuber that is very much found in the Jambi region. Cassava is easily damaged and decayed in a period of about two to five days after harvest, if it does not get good post-harvest treatment. It is necessary to process cassava crops into chips. To get the results of cassava chips that are good, there is a machine that can produce homogeneous chopped results. Besides that, it is expected that the cassava chopper machine can produce chopped with several forms of chopping. This study aims to make the design of multi-blade cassava chopper machines so that three types of chopping shapes can be produced with only one machine. Based on the results of the study, cassava chopper machines were produced with dimensions of length 630 mm wide by 390 mm and height of 450 mm. This machine uses a straight round multi-blade dish, waves and sticks. The capacity of this machine is 54 kg / hour and the power used is 185 watts.
References
Sukadi, “PENGGUNAAN BEBAN PENDORONG UMPAN YANG TEPAT PADA HASIL PERAJANGAN KERIPIK SINGKONG,” Teknika, vol. 2, no. 1, pp. 45–50, 2016.
Syawaldi, “PERENCANAAN DAN PERANCANGAN MEKANISME MESIN SEBAGAI ALAT PEMOTONG UMBI-UMBIAN (UBI KAYU/SINGKONG) UNTUK MENINGKATKAN USAHA INDUSTRI KECIL MENENGAH (IKM),” APTEK, vol. 9, no. 2, pp. 125–129, 2017.
A. Taqwim, “RANCANG BANGUN MESIN PEMOTONG SINGKONG MULTI INPUT DENGAN PENDORONG PEGAS,” J. Rekayasa Mesin, vol. 4, no. 2, pp. 53–59, 2017.
H. Batubara, T. Rahayuni, and R. Budiman, “Rancang Bangun Mesin Perajang Singkong Untuk Meningkatkan Efisiensi,” ELKHA, vol. 6, no. 1, pp. 28–33, 2014.
Downloads
Published
Issue
Section
License
Copyright (c) 2018 Sukadi, Novarini
This work is licensed under a Creative Commons Attribution 4.0 International License.
