Mesin Pengiris Tempe Semi Otomatis Jenis Disc Cutter Vertical

Authors

  • Hilda Porawati Politeknik Jambi
  • Ari Kurniawan Politeknik Jambi

DOI:

https://doi.org/10.37338/inovator.v4i2.147

Keywords:

Mesin Pengiris, Disc cut, Tempe

Abstract

Rempeyek Ilham is one of the Micro, Small and Medium Enterprises (MSMEs) in Jambi City which is engaged in the production of tempeh peanut brittle. The increase in the capacity of the tempeh slices is done by making an automatic tempeh slicing machine using a vertical disc cutter. The slicing method is to use a crankshaft mechanism which produces a reciprocating motion with a 2-way movement direction, namely the transfersal direction and the longitudinal direction. The thickness of the wedge is regulated by a stopper with the help of a spring push mechanism. The results showed that the tempe cutting machine with a cutting time of 1 minute 37 seconds, the average number of slices obtained with a size of 2 mm was 83.8 slices and for sizes above 2 mm (2.1 mm-3 mm) as many as 68 slices, and the rest of the tempeh pieces are 5.6 cm long.

References

Handoko, M 2018. Rancang Bangun Alat Pemotong Tempe Mekanis Tenaga Penggerak 0,5 HP. Skripsi. Fakultas Pertanian Universitas Sumatera Utara, Sumatera Utara.

Luhfi, F. Munir, A. Panggabean, S. 2016. Rancang Bangun Alat Pemotong Tempe. Jurnal Rekayasa Pangan dan Pertanian. Vol.(4):545-552.

C. Pramono, E. Mawarsih, and H. Kurniawan, “Analisis Mesin Pengiris Tempe Dengan Variasi Sudut Pisau Terhadap Ketebalan Irisan,” pp. 18–24. 2017.

E. Trianasari, D. R. Pamuji, G. S. Prayogo, and N. S. Rahayu, “Pemanfaatan Teknologi Tepat Guna Mesin Pengiris Tempe Untuk Meningkatkan Produktifitas Umkm Keripik Tempe Di Desa Siliragung Kecamatan Siliragung”. Jurnal Rotor. Vol. 10, No. November, pp. 64–66, 2017.

D. Risyandi and A. Triwiyatno, “Perancangan Sistem Perajang Tempe Otomatis Dengan Pengaturan Ketebalan Tempe Menggunakan Motor Stepper Berbasis P Controller”. Transient, Vol. 6, No. 1. pp. 134-149, 2017.

Pratama, D.I 2020. Analisa Kapasitas Potongan Tempe untuk Mendapatkan Hasil Potongan Tempe 5 mm dengan Menggunakan Mesin Pemotong Tempe Otomatis. Proyek Akhir. Politeknik Jambi.

F. Luhfi, A. P. Munir, and S. Panggabean, “Rancang Bangun Alat Pengiris Tempe (Design and Construction of Tempeh Slicer)”, Jurnal Rekayasa Pangan dan Pertanian, vol. 4, no. 4, pp. 545–552, 2016.

Downloads

Published

2021-11-30

How to Cite

Mesin Pengiris Tempe Semi Otomatis Jenis Disc Cutter Vertical . (2021). Jurnal INOVATOR, 4(2), 36-39. https://doi.org/10.37338/inovator.v4i2.147