Inovasi Media Pembelajaran Alat Berat: Prototipe Simulator Excavator Hidrolik Air Berbiaya Rendah Menggunakan Teknologi Fused Deposition Modeling (FDM)
DOI:
https://doi.org/10.37338/inovator.v8i2.521Keywords:
Simulator, Excavator, Hidrolik Air, 3D Printing, Media PembelajaranAbstract
The limitations of physical teaching aids pose a challenge to the effectiveness of learning in the heavy equipment course at Jambi Polytechnic. This study aims to address the issue by designing and building a low-cost excavator simulator prototype as an interactive learning medium. The research method consists of three main stages: component design using FUSION 360, manufacturing with 3D printing technology Fused Deposition Modeling (FDM) using PLA+ material, and assembly of a manual water-based hydraulic system utilizing syringes as actuators. The result is a functional prototype capable of accurately demonstrating all basic excavator movements, including base rotation, as well as boom, arm, and bucket movements controlled through levers. This simulator has proven to be an effective and practical teaching aid solution to enhance students’ practical understanding of mechanical principles and hydraulic systems in heavy equipment.
References
A. Febrianto, M. Suef, M. S. Hakim, K. D. Yayat, and I. Hardiatama, “Operational Efficiency and Sustainable Asset Management of Heavy Equipment in Industry: A Data-Driven Framework,” Results Eng., vol. 27, no. June, p. 106476, 2025, doi: 10.1016/j.rineng.2025.106476.
P. Odeyar, D. B. Apel, R. Hall, B. Zon, and K. Skrzypkowski, “A Review of Reliability and Fault Analysis Methods for Heavy Equipment and Their Components Used in Mining,” Energies, vol. 15, no. 17, pp. 1–27, 2022, doi: 10.3390/en15176263.
J. B. Sukoco, N. I. Kurniawati, R. E. Werdani, and A. Windriya, “Pemahaman Pendidikan Vokasi,” J. Pengabdi. Vokasi, vol. 01, no. 01, pp. 23–26, 2019.
R. Putra, W. Purwanto, H. Maksum, D. Irfan, M. Muslim, and H. D. Saputra, “Efektivitas Penggunaan Modul Berbasis Projeck Based Learning Dalam Pembelajaran Teknologi Alat Berat,” Rang Tek. J., vol. 5, no. 1, pp. 164–173, 2022, doi: 10.31869/rtj.v5i1.3068.
K. Kang, R. Y. Zhong, and A. Nassehi, “Integrated disassembly and assembly model for heavy duty equipment maintenance,” Procedia CIRP, vol. 93, no. March, pp. 995–1000, 2020, doi: 10.1016/j.procir.2020.04.086.
F. S. Lubis and F. P. Mayuta, “Pengendalian Persediaan Bahan Bakar Solar pada Perusahaan Jasa Penyewaan Alat Berat,” Semin. Nas. Teknol. Informasi, Komun. dan Ind., no. Lv, pp. 238–244, 2023.
I. Irawansyah, O. Mutmainnah, and E. Nurmala, “Peningkatan Kompetensi Lulusan Melalui Model Sertifikasi Operator Alat Berat pada Mahasiswa Program Studi Teknik Alat Berat AKOM Sumbawa,” MARAS J. Penelit. Multidisiplin, vol. 2, no. 2, pp. 935–950, 2024, doi: 10.60126/maras.v2i2.305.
P. Pitriadi, “Pembuatan Alat Peraga Simulasi Air Conditioning Alat Berat,” Semin. Nas. Has. Penelit. &Pengabdian …, pp. 73–77, 2024, [Online]. Available: https://jurnal.poliupg.ac.id/index.php/snp2m/article/view/5295
S. S. Muhammad Arham, Akhsan Hamka, Muhammad Fachruddin Bj, Andi Muhammad Syarif Nasir, Muh. Tawakkal , Mislahuddin Mislahuddin, TEKNOLOGI DAN INOVASI DALAM PENDIDIKAN TEKNIK MESIN: Tren dan Aplikasi Terbaru, vol. 17. 2024.
A. Mardalizad, A. Manes, and M. Giglio, “The numerical modelling of a middle strength rock material under Flexural test by Finite Element method-coupled to-SPH,” Procedia Struct. Integr., vol. 3, pp. 395–401, 2017, doi: 10.1016/j.prostr.2017.04.050.
M. W. Kasrani, A. F. S. Rahman, and R. Ramadoni, “Monitoring Lokasi Komponen Alat Berat Berbasis Internet Of Things Pada PT. Thiess BSF Batakan,” J. Tek. Elektro Uniba (JTE UNIBA), vol. 8, no. 1, pp. 394–398, 2023, doi: 10.36277/jteuniba.v8i1.248.
A. R. Sugiarto, D. P. Dicki, and M. M. A. Saripudin, “Perkembangan Teknologi Alat Berat di Era Konstruksi 4.0,” J. Forum Mek., vol. 12, no. 1, pp. 28–36, 2023, [Online]. Available: https://doi.org/10.33322/forummekanika.v12i1.2023
J. Akyeampong, S. J. Udoka, and E. H. Park, “A Hidrolik Excavator Augmented Reality Simulator for Operator Training,” Ind. Eng. Oper. Manag. Istanbul, pp. 1511–1518, 2012.
T. N. Hidayat, F. A. Purnomo, Y. Yudhanto, and E. H. Pratisto, “Pembuatan Aplikasi Media Pembelajaran Simulasi Alat Berat dengan Menggunakan Teknologi Virtual Reality,” Indones. J. Appl. Informatics, vol. 7, no. 2, p. 119, Aug. 2024, doi: 10.20961/ijai.v7i2.69108.
D. Fernando, H. Dwimas, Zulkifli, Arwin, A. M. Marali, and A. S. Adiffa, “Rancang Bangun Wireless Borescope Hidrolik Cylinder Menggunakan 3D Printing,” J. Alat Berat, vol. 2, no. 2, pp. 81–88, 2025, doi: 10.32487/jab.v2i2.42.
Y. A. Alli et al., “Optimization of 4D/3D printing via machine learning: A systematic review,” Hybrid Adv., vol. 6, no. June, p. 100242, Aug. 2024, doi: 10.1016/j.hybadv.2024.100242.
S. Purwanto, N. Aisyah, B. D. Prihadianto, R. Krisnaputra, F. E. Wismo, and I. Bahiuddin, “RANCANGAN SISTEM HIDROLIK PADA FRONT ATTACHMENT ALAT PERAGA MINI EXCAVATOR,” J. Rekayasa Mesin, vol. 15, no. 2, pp. 1153–1163, Aug. 2024, doi: 10.21776/jrm.v15i2.1729.
C. Favi, L. Murgese, N. Villazzi, S. Gallozzi, M. Mandolini, and M. Marconi, “Integrating life cycle engineering into design for additive manufacturing: A review,” J. Manuf. Syst., vol. 82, no. May, pp. 599–631, 2025, doi: 10.1016/j.jmsy.2025.07.010.
I. Cad, Q. Zou, Y. Wu, Z. Liu, W. Xu, and S. Gao, “Intelligent CAD 2.0 Qiang,” vol. 8, pp. 1–12, 2024, doi: 10.1016/j.visinf.2024.10.001.
C. Uwimana et al., “Segmentation of CAD models using hybrid representation,” Virtual Real. Intell. Hardw., vol. 7, no. 2, pp. 188–202, 2025, doi: 10.1016/j.vrih.2025.01.001.
R. Ayyagari, Q. Chen, and B. García de Soto, “Quantifying the impact of concrete 3D printing on the construction supply chain,” Autom. Constr., vol. 155, no. July, p. 105032, Nov. 2023, doi: 10.1016/j.autcon.2023.105032.
P. Pristiansyah, H. Hasdiansah, and S. Sugiyarto, “Optimasi Parameter Proses 3D Printing FDM Terhadap Akurasi Dimensi Menggunakan Filament Eflex,” Manutech J. Teknol. Manufaktur, vol. 11, no. 01, pp. 33–40, 2019, doi: 10.33504/manutech.v11i01.98.
J. Teknologi, T. Jatra, R. Hakim, I. Saputra, G. P. Utama, and Y. Setyoadi, “Pengaruh T Emperatur N Ozzle Dan B Ase P Late P Ada M Aterial Pla T Erhadap N Ilai M Asa J Enis Dan K Ekasaran P Ermukaan,” vol. 1, no. 1, pp. 1–8, 2019.
M. H. Shahna, P. Mustalahti, and J. Mattila, “Robust torque-observed control with safe input–output constraints for hidrolik in-wheel drive systems in mobile robots,” Control Eng. Pract., vol. 164, no. July, p. 106459, 2025, doi: 10.1016/j.conengprac.2025.106459.
J. Daehn, A. Wierschem, and E. Ultsch, “Comparison of hidrolik and pneumatic flow in a proportional solenoid valve,” Appl. Eng. Sci., vol. 23, no. July, 2025, doi: 10.1016/j.apples.2025.100248.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Wibi Pramanda, Sandi Yudha Barri Zaqi, Satrio Darma Utama
This work is licensed under a Creative Commons Attribution 4.0 International License.
