Perancangan Desain dan Simulasi Alat Screening Tray Carrier pada proses Cleaning and Inspection
DOI:
https://doi.org/10.37338/exrh3m85Keywords:
Screening Tray Carrier, Cleaning and Inspection, FEA, IC TrayAbstract
Penelitian ini bertujuan untuk merancang dan mensimulasikan alat Screening Tray Carrier yang digunakan untuk mendukung proses Cleaning and Inspection pada IC Tray. Penelitian ini dilakukan di PT. XYZ, sebuah perusahaan multinasional yang bergerak dalam bidang semikonduktor, khususnya dalam proses perakitan dan pengujian Integrated Circuit (IC). permasalahan yang diangkat adalah tidak standarnya penanganan IC Tray yang berpotensi menyebabkan kerusakan fisik dan tidak sesuai dengan prinsip Greenline yang diterapkan oleh perusahaan. Perancangan alat dilakukan menggunakan perangkat lunak Solidwork, kemudian dilakukan simulasi visualisasi melalui Motion Study dan analisis kekuatan struktur menggunakan pendekatan Finite Element Analysis (FEA). Motion Study digunakan untuk menggambarkan bagaimana alat bekerja dalam kondisi operasional, sedangkan FEA digunakan untuk mengetahui tegangan, perpindahan, regangan, dan faktor keamanan struktur saat menahan beban 1 lot IC Tray (3,2kg). Hasil simulasi menunjukkan bahwa alat memiliki distribusi tegangan maksimum sebesar 7,014 MPa dan perpindahan maksimum 0,699 mm, regangan maksimum 0.01, dengan Factor of Safety nya sebesar 20. Simulasi Motion Study menunjukkan bahwa alat berfungsi secara fungsional sesuai dengan kebutuhan operasional. Dengan demikian, alat ini dapat menjadi solusi efektif dalam meningkatkan efisiensi, keamanan, serta keteraturan proses handling IC Tray sesuai standar Greenline pada PT XYZ.
References
[1] R. Hakim, “PENINGKATAN KUALITAS PRODUK DAN PRODUKTIFITAS PADA PROSES LASER MARKING PERANKITAN INTEGRATED CIRCUIT,” PROFISIENSI: Jurnal Program Studi Teknik Industri, vol. 9, no. 1, pp. 170–177, Jul. 2021, doi: 10.33373/profis.v9i1.3260.
[2] Z. Kreiner, “JEDEC Tray Flexures for High-Consequence Electronics,” Albuquerque, NM, and Livermore, CA (United States), Feb. 2020. doi: 10.2172/1604123.
[3] C.-Y. Yang, K.-S. Chen, and T.-S. Yang, “Reconstituted Wafer Deformation Analysis Through Whole Process Emulation,” IEEE Transactions on Device and Materials Reliability, vol. 20, no. 1, pp. 172–180, Mar. 2020, doi: 10.1109/TDMR.2020.2972888.
[4] K. Yuvaraj and G. Arunkumar, “Fatigue failure and structural integrity analysis of a 3-inch butterfly valve shaft using finite element modelling and microstructural evaluation,” Advances in Science and Technology Research Journal, vol. 19, no. 5, pp. 440–453, May 2025, doi: 10.12913/22998624/202756.
[5] I. H. Zainelabdeen, F. A. Al-Badour, R. K. Suleiman, A. Y. Adesina, N. Merah, and F. A. Ghaith, “Influence of Friction Stir Surface Processing on the Corrosion Resistance of Al 6061,” Materials, vol. 15, no. 22, p. 8124, Nov. 2022, doi: 10.3390/ma15228124.
[6] J. Zhao, H. Zhang, X. Yang, Y. Gu, and Y. Liu, “Local Electrochemical Corrosion of 6061 Aluminum Alloy with Nano-SiO2/MAO Composite Coating,” Materials, vol. 16, no. 20, p. 6721, Oct. 2023, doi: 10.3390/ma16206721.
[7] C. Leyva-Porras, I. A. Estrada-Moreno, C. I. Piñón-Balderrama, S. G. Flores-Gallardo, and A. Márquez-Lucero, “Thermodynamic Parameters of Crosslinked Elastomers (BR, SBR and NBR) and Their Blends,” Polymers (Basel)., vol. 16, no. 3, p. 351, Jan. 2024, doi: 10.3390/polym16030351.
[8] M. Müller, V. Šleger, J. Čedík, and M. Pexa, “Research on the Material Compatibility of Elastomer Sealing O-Rings,” Polymers (Basel)., vol. 14, no. 16, p. 3323, Aug. 2022, doi: 10.3390/polym14163323.
[9] A. Yong, “From Pietism to Pluralism: Boston Personalism and the Liberal Era in American Methodist Theology, 1876-1953,” Portland, OR, Jan. 2000. doi: 10.15760/etd.3088.
[10] V. Panwar, D. Kumar Sharma, K. V. Pradeep Kumar, A. Jain, and C. Thakar, “Experimental investigations and optimization of surface roughness in turning of en 36 alloy steel using response surface methodology and genetic algorithm,” Mater. Today Proc., vol. 46, pp. 6474–6481, 2021, doi: 10.1016/j.matpr.2021.03.642.
[11] Y. Yan et al., “Failure analysis and deformation mechanism of segmented utility tunnels crossing ground fissure zones with different intersection angles,” Eng. Fail. Anal., vol. 139, p. 106456, Sep. 2022, doi: 10.1016/j.engfailanal.2022.106456.
[12] B. N. Dhanunjayarao, N. V. Swamy Naidu, Y. Phaneendra, and M. V. S. N. Murty, “Detailed assessment on effect of graphite on mechanical properties of E-Glass/Flax epoxy hybrid polymer composite,” Mater. Today Proc., vol. 83, pp. 83–91, 2023, doi: 10.1016/j.matpr.2023.02.112.
[13] P. Bedar, A. C R, and C. T V, “Design, 3D Modelling, and study on L-Bracket Rib Strength through FEM Analysis: A Comparative Study using Solid Works and Ansys Software,” Int. J. Sci. Res. Sci. Eng. Technol., pp. 677–686, Jan. 2018, doi: 10.32628/IJSRSET173391.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Agnes Br Manurung
This work is licensed under a Creative Commons Attribution 4.0 International License.
